chain link fence design and installation

1. A chain link fence is installed quite simply, by installing posts into the ground and then attaching the mesh fencing to them.
2. To star,t you will need to get your posts. These can be steel, timber, or concrete. The posts are driven into the ground or can also be set into the ground with concrete.
3. These line posts should be set at intervals of no more than 10 feet.
4. Terminal posts are posts that either the end posts, on a corner or gate posts. These posts are always set in concrete or anchored, so as to prevent leaning.
5. The mesh fencing is then attached at one end and stretched to reach the other end. Any excess can be removed by unscrewing the wire.
6. The mesh is tied to the line posts with an aluminum wire.
7. To help minimize the in and out movement of the bottom of a chain link fence, often a ‘coil wire’ is attached between the terminal posts.
8. The ‘coil wire’ should be secured to the line posts once it is stretched. The mesh fencing is ‘hog-ringed’ to the tension wire at the center.

At Dell Outdoor, we can handle the installation of your chain-link fence. Our team will guide you through the entire process, from the planning and design phase to the installation phase. Getting the help of a professional fencing company like Dell will ensure you get a chain link fence that is not only going to be durable and stand the test of time, but one that will also enhance the look of your property as a whole. So don’t hesitate and contact us today for a consultation. Let us turn your fencing vision into a reality!
‍
If you’re looking for a contractor you can trust to get the job done right, please feel free to set up an in-home consultation and receive a written estimate.